Ring with a Twist Video Tutorial

Ready for another ring tutorial?!  This ring is simple to make and the design can be easily adapted to suit your own style. You can use whatever beads you want but smaller (4mm and 2mm) round beads work best.


Materials: 
6 inches (15 cm) of 20 gauge wire;
24 inches (50 cm) of 26 gauge wire;
3 x 4 mm beads; and
8 x 2mm beads.

Tools:
wire cutters;
round nose plier; and
a ring mandrel (optional but will make life a lot easier!)

Watch the video below to see the tutorial:

Paper Beads Tutorial

I love experimenting with different mediums, especially paper! As I have said before, I LOVE traditional origami paper.  I love experimenting to see how I can work beautiful paper into my jewelry designs. Making papers beads is very simple.  They may sound like something you would have made as a child, but the results can be very elegant and totally unique. 

The style of bead you make will depend on how you cut your paper.  The first style I made was by cutting a square piece of paper into triangular strips.  For accuracy, I drew the triangles on the back of the paper. I then cut the paper into triangular strips. 

I then wrapped the paper, starting with the largest section of the paper, around a wooden skewer. It is best to wrap the paper tightly around the skewer for this stage.







Once you get to the end, glue the inside of the last section of the paper and wrap it around the wrapped part of the paper.









Hold the glued section closed for about 30 seconds to allow it to set.

You can change the shape of your beads by changing the way that you cut the paper in the first step.  You can make rectangular strips of paper to make the beads I used to make the earrings above.  Experiment with different shapes of paper to find something totally unique!

Three Bead Ring

Making rings from wire can be a little daunting but can lead to beautiful results.

To make this three bead ring, you will need:

1. 24 inches (50 cm) of 28 gauge wire;
2. 6 inches (15 cm) of 20 gauge wire; and 
3. 3 x 4mm beads.

I used opaque glass Czech beads with gold plated wire.  

Happy ring making!! 

Origami Leaf Earrings

I love origami paper - particularly the traditional Japanese designs.  I recently bought a bunch of beautiful paper online and I have been incorporating it into my jewelry designs.

These leaf earrings are very easy to make and look beautiful.

You will need:

1. once piece of square origami paper (the piece I used was about 5 inches x 5 inches (12cm x 12cm), and the earrings I made were quite large.  You therefore might want to try using a smaller piece of paper if you do not want your earrings to be so dramatic);
2. 10cm (3.15 inches) of 24 gauge wire; 
3. 2 earring hooks; and 
4. a small amount of craft glue. 

The first step, is to cut your square paper in half diagonally.

Next, turn the paper face down.  Fold the largest section of the paper, about 2mm from the edge of the paper.

Continue folding the paper, turning it onto the other side every time you do, so that is is folded like an accordion. 

Fold the paper in half, bringing the largest sections of the paper together. 

The next step is to make a wire loop so that you can connect the paper to an earring hook.  You could use a jump ring to do this, but I prefer to make a wrapped loop so that the structure is stronger without the need for solder.  Take a 5cm length of wire, and bend the top of the wire around pliers to make a loop. 

Bend the longer length of wire around the pliers so that you make a second, larger loop. You want the loop to be large enough so that the folded paper can be threaded through it. 

 Wrap the wire twice around the 'stem' wire, towards the top of the smaller loop. Trim the excess wire.

Thread the folder paper through the large loop. The loop should be held in the section where the paper was folded in half. 

Place glue along the edges of the inside of the folded paper.  Make sure not to glue the other folded sections together, otherwise the earrings will not fan out. 

Thread the top small loop onto an earring hook, and your earrings are complete!

You can cover the earrings with Mod Podge or an acrylic spray to make them more durable. 

How to make hair sticks

This is one of my favourite projects. I love hair sticks - I stick one in my bun or wrap my hair around the stick to cover up a bad hair day.

In my experience, hair sticks are very popular with consumers. They are really simple to make, and you can adapt them to suit your individual style.

They are incredibly simple to make.  All you need is:

1. a pre-drilled hair stick (you can buy them online or you can buy a wooden chopstick and drill the centre)
2. a couple of beads,
3. a bead cap; and 
4. a small amount of super glue. 

The video tutorial is below. I hope you love them as much as I do!